Close
(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories
    Filters
    Preferences
    Search

    4 hp Horizontal Centrifugal Pump, Single Stage

    5 out of 5 based on 1 reviews | Write a review
    $1,530.16
    Lower cost horizontal centrifugal pump online for sale, centrifugal water pump with motor power 4 hp, 0°, 90° and 180° installation angle of outlet. High pressure centrifugal pump has optional input frequency 50Hz/ 60Hz, maximum flow 16.3m³/ h (71.8 gpm), maximum head 33m (108ft). Single stage centrifugal pump can be used for high-rise building pressurized water supply, HVAC & refrigeration water circulation.
    *
    *
    SKU: ATO-HCP-3000W
    30-day Returns
    Free Shipping
    Delivery date: 6-12 days

    3 phase centrifugal pump has optional input voltage from AC 220V to 480V and same diameter of inlet and outlet 50mm (2 inches). The three phase centrifugal water pump has advantages of wide range of performance adaptations (including flow rate, pressure head and adaptability to the properties of the conveying medium), small size, simple structure.

    Features:

    1. The centrifugal pump has the horizontal structure. The diameter of the inlet and outlet are the same. If a protective cover is added, it can be used in the open air.
    2. It is easy to install and maintain. No need to dismantle pipeline system, just lifting off the conjunction flat nut of vertical pump. Then all the rotor parts can be taken out.
    3. Horizontal centrifugal pump can be operating in series and parallel connection according to the requirements of flow and head.
    4. The installation angle of pump outlet can be 0°, 90° and 180° to meet different connection occasions.

    Specification

    • Model: ATO-HCP-50-160
    • Power: 4 hp (3kW)
    • Number of stages: Single stage
    • Input voltage: AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
    • Input frequency: 50Hz/ 60Hz
    • Inlet diameter: 50mm (2 inch)
    • Outlet diameter: 50mm (2 inch)
    • Flow (min. flow to max. flow): 8.8 m³/ h (38.7gpm), 12.5 m³/ h (55gpm), 16.3 m³/ h (71.8gpm)
    • Head (max. head to min. head): 33m (108ft), 32m (105ft), 30m (98ft)
    • Efficiency: 45%/ 52%/ 51%
    • Nominal diameter of impeller: 160mm
    • Size: 370*560*250mm
    • Weight: 80kg

    Dimension (mm)

    Boundary dimension h H L a A
    210 370 560 80 55
    Base dimension L1 B I b h1 4-φd1
    400 250 350 150 80 4-φ14
    Flange dimension D D1 n-φd
    φ165 φ125 4-φ18

    Horizontal centrifugal pump dimension

    Tips: Optimizing and Transforming Methods of the Centrifugal Pump.

    As everyone knows, during the daily water supply operation of the pump, the water using period is divided into the peak period and the low peak period according to the different water use time. The amount of water used by the user varies greatly, and the water demand of the system is less than the flow rate of the design condition point in most of the time.

    In order to meet the user's water using requirements and economic operation objective, the pump flow rate and head are usually required to be changed to vary the working point. The operating point of the centrifugal pump is determined by the characteristics of the pump and the characteristics of the piping jointly. In order to realize the economic operation in the pumping station, the operating conditions of the pump must be adjusted. The specific means include:

    • Adjust the throttling valve (change pipeline resistance)
    • Adjust the guiding blade at the entrance (change the blade installation angle)
    • Change the impeller diameter
    • Change the revolving speed of the pump

    In which, the adjustment throttling valve realizes the working condition regulation by changing the pipeline characteristic curve, and the throttling valve achieves this through increasing the pipeline resistance and reducing flow rate. This adjustment method is obviously uneconomical. Increasing the resistance of the pipeline is equivalent to increasing the pipeline loss. After the flow rate is lowered down, the power drop is not obvious. There is also a cavitation problem in the adjustment of the throttling valve of the pump suction end, so this method cannot effectively adjust the flow rate.

    The adjustment of the inlet guiding blade is the basic method of the flow rate adjustment of the pump, and the Q-H characteristic curve can be changed to achieve the flow regulation purpose. At this moment, the power is roughly in direct proportion to the flow rate, and the power required to regulate the outlet valve is relatively small.

    The adjustment means of changing the impeller diameter cannot be used as a real-time adjustment, so this method has a greater limitation in application. Only the angle and speed changing regulation can be used for real-time adjustment, and the speed changing adjustment has the advantages of wider adjustment range, higher adjustment efficiency, and stronger operability compared with the angle changing regulation.

    Phase 3 phase
    Input voltage AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
    Input frequency 50Hz, 60Hz
    Installation angle of outlet 0°, 90° and 180°
    Pump type Booster pump
    Number of stages Single stage
    Motor type Y/ Y2 series motor
    Motor speed 2900rpm
    Impeller material 304/ 316 stainless steel
    Seal material 304 stainless steel, tungsten carbide, fluorine rubber
    Inlet max. pressure 1MPa (145 psi)
    (NPSH)r 2.3m
    Usage Water, or liquids compatible with pump component materials.
    1. The volume of solid particles should be less than 0.1% in unit volume, and the granularity should be less than 0.2mm.
    2. The temperature should be lower than 60℃.
    Environment Temperature: <40℃, humidity: <95%, altitude<1000m
    Warranty 12 months

    Different types of centrifugal pumps

    This video explains different types of centrifugal pumps that can be selected according to one's own needs.

    Principles and functionality explained

    This video tells us what a centrifugal pump is and its working principle, and you will have a general understanding of it.

    Components of centrifugal pumps

    This video is an explanation of the components of a centrifugal pump, and we can learn the basic knowledge of the eight components of a centrifugal pump from it.

    Existing reviews of 4 hp Horizontal Centrifugal Pump, Single Stage
    The 4hp horizontal centrifugal pump matches my work perfectly!
    The pump arrived on time and which had well-packed. The horizontal centrifugal pump is easy to install and worked perfectly right out of the box. It matches my work perfectly! I would recommend it.
    From: mikepos | Date: 27/03/2023
    Was this review helpful? Yes No (0/0)
    Load more reviews...
    Write your review for 4 hp Horizontal Centrifugal Pump, Single Stage
    • Only registered users can write reviews
    • Bad
    • Excellent