Advertisement
Table of Contents
- 1 Operation of the Monitor
- 2 Adjusting Height, Rake and Rotation
- 3 Adjusting Portrait Format
- 4 Switching the Monitor On/Off
- 5 Changing the Monitor Settings
- 6 Changing the Monitor Settings with the Buttons of the Control Panel
- 7 Locking Osd Menu
- 8 Locking ON/OFF Button
- 9 Monitor Settings Using the Osd Menu
- 10 Notes on Ergonomic Colour Adjustment
- 11 Troubleshooting
- Download this manual
See also:
Operating Manual
Advertisement
Table of Contents
Related Manuals for Fujitsu Siemens Computers Fujitsu Siemens SCENICVIEW P17-2
Summary of Contents for Fujitsu Siemens Computers Fujitsu Siemens SCENICVIEW P17-2
- Page 1 Monitor English Operating Manual SCENICVIEW P17-2 / P19-2 / P20-2...
-
Page 2: Operation Of The Monitor
SCENICVIEW P17-2 / P19-2 / P20-2 Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting height, rake and rotation The monitor height can be adjusted within a range of approx. 2.5 inch/70 mm. ►... -
Page 3: Adjusting Portrait Format
SCENICVIEW P17-2 / P19-2 / P20-2 Adjusting portrait format The monitor can be turned from the "wide format" (landscape mode) into the "high format" position (portrait mode). Grasp the monitor with both hands on the right and left edge of the casing, move it into the Ê... -
Page 4: Changing The Monitor Settings
SCENICVIEW P17-2 / P19-2 / P20-2 Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Choosing basic monitor settings using the supplied software If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000, Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be set with the CD supplied. -
Page 5: Locking Osd Menu
SCENICVIEW P17-2 / P19-2 / P20-2 Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while you switch on the monitor with the ON/OFF switch. - Page 6 SCENICVIEW P17-2 / P19-2 / P20-2 The corresponding setting window (here: Image Adjust) is displayed (on the right-hand side). All changes are stored automatically. If you want to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described in the following.
- Page 7 SCENICVIEW P17-2 / P19-2 / P20-2 Adjusting size and position Calling the Image adjust setting window Adjusting the horizontal position H-Position With this function you move the picture to the left or to the right. Adjusting the vertical position V-Position With this function you move the picture up or down.
- Page 8 SCENICVIEW P17-2 / P19-2 / P20-2 Setting display of the OSD menu Calling the OSD Setup setting window Setting language for the OSD menu Language With this function you choose between English (default setting), French, German, Italian and Spanish as the language for the OSD menu. Setting the horizontal position of the OSD menu H-Position With this function you move the OSD menu to the left or to the right.
-
Page 9: Notes On Ergonomic Colour Adjustment
SCENICVIEW P17-2 / P19-2 / P20-2 Displaying information Calling the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal and polarity of the synchronisation signal are displayed. Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below. -
Page 10: Troubleshooting
SCENICVIEW P17-2 / P19-2 / P20-2 Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? No screen display (power indicator does not light) - Page 11 SCENICVIEW P17-2 / P19-2 / P20-2 Having this problem? Picture is wrongly adjusted Picture disturbances (vertical lines) Picture disturbances (horizontal lines, picture noise) The screen becomes darker Check the following points: ► Press the SELECT/MENU button to activate the function Factory Recall. The Auto Processing message is displayed.