- Dental >
- Dental instrument >
- Drill bit
Drill bits
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
De Soutter Medical offer a wide range of drills from plain shank, A.O, cannulated and radiolucent types. Technical Information: Plain shank Diameter: 1.5 - 5.0 mm Overall length: 70 - 180 mm AO Diameter: 1.1 ...
Our Gates Glidden instruments are used primarily for shaping the coronal third of the root canal.
For drills with a diameter of 0.3 – 7.4 mm Speed range: 200 – 2600 rpm Maximal torque: 60 Ncm Coupling, Motor connection after INTRA EN3964
Length: 22 mm
Customized solutions optimized for the particular materials and equipment
Length: 18 mm
Customized solutions optimized for the particular materials and equipment
The cylindro-conical ParaPost Drills Tapered are available in four sizes and are compatible only with ParaPost Taper Lux Posts. Two-fluted Colour-coded sizes Very good cutting efficiency Laser marks at 7, 9 and 11 mm ...
Universal drill for implantology. Drill dimensions for classic implantology: ø 2.8 mm, length 19 mm ø 3.4 mm, length 19 mm ø 3.8 mm, length 19 mm ø 4.5 mm, length 19 mm It is made in AISI 630 ...
Universal pilot drill with lance dimensions: diameter ø 2mm, length 15mm. Pilot drill dimensions for classic implantology: ø 1.4 mm, length 15 mm ø 2.0 mm, length 15 mm ø 2.0 mm, length 29 mm ø ...
Universal drill for guided implantology. Drill measurements for guided implantology: ø 2.8 mm, length 29 mm ø 3.4 mm, length 29 mm ø 3.8 mm, length 29 mm ø 4.5 mm, length 29 mm Pilot drill ...
Each size of fiber post has its relative reamer. Our stainless steel reamers are designed for a lateral cut (of root canal) with a profile few microns more than the referred post to allow cementation. Bioloren reamers last more than 30 ...
BIOLOREN s.a.s. di Ratti Andrea Alessandro & C.
End mills for Zr designed for use with interdent milling units CC newChic, CC Trendy/+, CC Fashion, CC Universe, CC newCosmo and with all open milling units, which allow the clamping of cutters with a diameter of fi 3mm, common length ...
INTERDENT d.o.o.
End mills for CoCr and Titanium designed for use with Interdent milling units CC Power, CC Cosmo+, CC newChic, CC Trendy/+, CC Universe, CC Fashion, CC newCosmo and with all open milling units, which allow the clamping of cutters with ...
INTERDENT d.o.o.
Length: 35, 40 mm
Universal End mills designed for use with interdent milling units CC newChic, CC Trendy/+, CC Fashion, CC Universe in CC newCosmo and with all open milling units, which allow the clamping of cutters with a diameter of fi 3mm.
INTERDENT d.o.o.
... depth band, specifications and item code on drills and do different color ring and coating just according to your any specific requirement. Some drills can be external or internal irrigation . LZQ can ...
Shanghai LZQ Precision Tool
... an OEM factory for all kinds of bone drills, such as, dentofacial surgical drill, orthopedics drill, neurosurgical drill bits, Skull milling cutter, ...
Shanghai LZQ Precision Tool
... dental implant drills, such as twist drill, conical drill, lance drill, Lindemann drill, cortical drill, stop drill, ...
Shanghai LZQ Precision Tool
JMSB1 : ① Max. speed: 25,000 rpm, ② Stepless adjustment of speed, ③ Hand control & foot control.
①Compatable with micromotor, ②Range of clamping:Ф0.5-2.5mm,
①straight 4-bladed shape ②Tip Φ:1.5/1.6/2.0/2.5/3.0 mm ③L:11/12/18/26 mm ④For skull gap Φ:1.6-2.34mm, ⑤Min. radius of cutting :5mm Single-use
Speed: 0 ~20,000 RPM Length: 300mm OD: 3.5mm Straight
Speed: 0 ~20,000 RPM Length: 300mm OD: 3.5mm Angled
... is designed to be used with the Drill sleeve instrument The depth markings can be read on the Drill tap shaft at 5 mm increments, when used with the Drill sleeve The Drill ...
Skeletal Ttraction Drill Product Parameter φ1.0/φ1.2/φ1.5/φ2.0/φ2.5/φ3.0/φ3.5
Drill Bit Product Parameter φ1.1/φ1.5/φ1.8/φ2.0/φ2.4/φ2.5/φ2.7/φ2.8/φ3.2/φ3.5/φ4.0/φ4.3/φ7.0
Cannulated Drill Bit Product Parameter φ2.0/φ2.2/φ2.7/φ3.5/φ4.6/φ5.0
• THE POSSIBILITY OF DRILLING OUT ON A TANGENTIAL ANGLE TO ARTHRODESIS SURFACE • THE DRILLING DUST CAN BE USED AS OSTEOGENIC MATERIAL FOR THE CRACK AFFECTED BY ARTHRODESIS • EASY TO CARRY OUT BONE DUST OUT OF THE BONE
The minimal-invasive surgery reveals new treatments perspectives for many foot pathologies. Agomed, specialist and precursor, wishes to succeed in this avant-garde technique. This complete minimal invasive solution was designed to answer ...
Wide range of solutions developed from a close partnership between SOFEMED and ‘Hopital d’enfants de Tunis’ teams since many years. Other pediatric orthopedic surgeons were also involved to provide better implants for children and adolescents. ...
SOFEMED International
Wide range of solutions developed from a close partnership between SOFEMED and ‘Hopital d’enfants de Tunis’ teams since many years. Other pediatric orthopedic surgeons were also involved to provide better implants for children and adolescents. ...
SOFEMED International
... years. Other pediatric orthopedic surgeons were also involved to provide better implants for children and adolescents. Drill with quick coupling Ø2,8x160 mm AO type.
SOFEMED International
Form drill PROGRESSIVE-LINE resterilizable Material Stainless steel
... a new stepped drill design which streamlines the surgical protocol. Tapered Short drills consist of a universal starter drill with intermediate and final drills that ...
The 1.5mm starter drill facilitates precise initiation of osteotomies and features a 10.5mm depth marking.
... fixture. When placing a ORBIT fixture in soft bone (D IV) the surgeon should consider undersizing osteotomy. The final drill diameter should be limited to the one immediately smaller than the diameter that should ...
Nasal Pterygoid straight drill Ø 2.0 Nasal Pterygoid straight drill Ø 2.4 Material AISI630
Length: 30 mm
Core drills are designed to be used for initial osteotomy for implant placement. Core drills come in 2.3, 2.65, and 3 mm diameters and are to be used with their respective Narrow, Standard, and Wide implant ...
Dental Evolutions, Inc
Length: 40 mm
Core drills are designed to be used for initial osteotomy for implant placement. Core drills come in 2.3, 2.65, and 3 mm diameters and are to be used with their respective Narrow, Standard, and Wide implant ...
Dental Evolutions, Inc
Length: 39 mm
Head drills are designed to be used for countersink osteotomy for implant placement, after pilot drilling. Head drills come in 3.1, 4.1, and 5.1 mm diameters and are to be used with their respective Narrow, ...
Dental Evolutions, Inc
C-I™ Posts are available in three compositions and feature a unique, tapered design to match the anatomical shape of a tooth’s root canal. Choose from three popular styles. C-I White Glass Fiber Posts Parkell’s C-I White Glass Fiber ...
... diameter of each drill is color-coded as well as etched on the upper portion of the drill. The depth markings are both milled and etched. Every diameter of the parallel drill has five ...
... of each drill is color-coded as well as etched on the upper portion of the drill. The depth markings are both milled and etched. Every diameter of the parallel drill has five length. ...
... diameter of each drill is color-coded as well as etched on the upper part of the drill. The depth markings are both milled and etched. Every diameter of the parallel drill has five lengths. All ...
Pilote drill in diameter 1,60 mm for the mini-implant placement in diameter 2,50 mm
Length: 16, 22 mm
Designed for high performance and excellent cutting efficiency, Dríva Gold Series Drills are reusable, externally irrigated, and compatible with existing surgical protocols for Trabecular Metal™, Tapered Screw-Vent® and ...
Zimmer Dental
... Drill Length Short Length 25 mm Procedure Non-guided Details New Profile Drills, FIBA compatible, available These FIBA-compatible profile drills can be used in freehand cases, or in ...
SURGICAL DRILL POINT PILOT 1.1 x 17mm ( 3 - 6 - 9 -12mm )
Available drills engineered for accurate model drilling according to the removable pin in use. Zeiser type cone-shaped drill Pindex type twin section drill Stem diameter: mm 3.00
Dentalfarm Srl
Your suggestions for improvement:
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining